- 94
- 252 738
HDAmodelworx
United States
Приєднався 11 кві 2013
Welcome to HDA ModelWorx!
This channel is devoted to the pursuit of SciFi model subjects showing available products from HDA Modelworx including model kits, model bases, high resolution decals, painting masks, and electronic products such as LEDs and SMDs specially chosen to enhance any modeling project.
Be sure to check back every week for new videos detailing our products as well as demonstrations!
This channel is devoted to the pursuit of SciFi model subjects showing available products from HDA Modelworx including model kits, model bases, high resolution decals, painting masks, and electronic products such as LEDs and SMDs specially chosen to enhance any modeling project.
Be sure to check back every week for new videos detailing our products as well as demonstrations!
K7 SHUTTLE BAY
Welcome to HDAmodelworx, where we provide the best parts for your scale modeling needs!
Today's video is a quick demonstration of our shuttle bay parts for the TOS Star Trek K7 Space Station from AMT as demonstrated by Jason from Jason's Model Shop. Thank you, Jason for the demonstration. We recommend Jason's work which you can follow on his social media here:
linktr.ee/jasonsmodelshop
These parts provide a complete shuttle bay with decals, masks, and shuttles to replicate the style of K7 space station as see in ST Deep Space Nine. The DS9 model was a recreation of the model as seen in the original TOS episode "The Trouble with Tribbles."
Masks available here:
hdamodelworx.com/K7-SPACE-STATION-SHUTTLE-BAY-HANGER-DECK-for-the-AMT-model-kit-by-HDAMODELWORKS-_p_1257.html
__________________________________________________________________
SUBSCRIBE TO HDA MODELWORX:
ua-cam.com/users/HDAmodelworx
__________________________________________________________________
LET'S CONNECT!
- Website: www.hdamodelworx.com
SOCIAL
- Facebook: HDAmodelworx...
- Instagram: / hdamodelworx
__________________________________________________________________
MORE FROM HDA MODELWORX
1/1000 Refit Shuttlebay Decals: • Shuttlebay Decals for the Polar Light...
SMD's by HDA Modelworx: • Surface Mount Light Emitting Diodes (...
Flickering LED's by HDA Modelworx: • Surface Mount Light Emitting Diodes (...
Blinking LED by HDA Modelworx: • 3mm White Blinking Light Emitting Dio...
__________________________________________________________________
ABOUT HDA MODELWORX
This channel is devoted to the pursuit of SciFi model subjects showing available products from HDA Modelworx including model kits, model bases, high resolution decals, painting masks, and electronic products such as LEDs and SMDs specially chosen to enhance any modeling project.
Today's video is a quick demonstration of our shuttle bay parts for the TOS Star Trek K7 Space Station from AMT as demonstrated by Jason from Jason's Model Shop. Thank you, Jason for the demonstration. We recommend Jason's work which you can follow on his social media here:
linktr.ee/jasonsmodelshop
These parts provide a complete shuttle bay with decals, masks, and shuttles to replicate the style of K7 space station as see in ST Deep Space Nine. The DS9 model was a recreation of the model as seen in the original TOS episode "The Trouble with Tribbles."
Masks available here:
hdamodelworx.com/K7-SPACE-STATION-SHUTTLE-BAY-HANGER-DECK-for-the-AMT-model-kit-by-HDAMODELWORKS-_p_1257.html
__________________________________________________________________
SUBSCRIBE TO HDA MODELWORX:
ua-cam.com/users/HDAmodelworx
__________________________________________________________________
LET'S CONNECT!
- Website: www.hdamodelworx.com
SOCIAL
- Facebook: HDAmodelworx...
- Instagram: / hdamodelworx
__________________________________________________________________
MORE FROM HDA MODELWORX
1/1000 Refit Shuttlebay Decals: • Shuttlebay Decals for the Polar Light...
SMD's by HDA Modelworx: • Surface Mount Light Emitting Diodes (...
Flickering LED's by HDA Modelworx: • Surface Mount Light Emitting Diodes (...
Blinking LED by HDA Modelworx: • 3mm White Blinking Light Emitting Dio...
__________________________________________________________________
ABOUT HDA MODELWORX
This channel is devoted to the pursuit of SciFi model subjects showing available products from HDA Modelworx including model kits, model bases, high resolution decals, painting masks, and electronic products such as LEDs and SMDs specially chosen to enhance any modeling project.
Переглядів: 159
Відео
HDAmodelworx presents Green Strawberry Runabout Exterior Accessory Set Installation Instructions.
Переглядів 2624 місяці тому
Welcome to HDA Modelworx, where I provide the best parts for your SciFi scale modeling needs! This video is our first in a new series of instructional programs helping modelers on how to install the photo etch and resin parts that come in the Green Strawberry model detail set for the Runabout shuttle craft. (Part# 15622-1/72. Danube class - exterior Rio Grande Runabout Photoetch and Resin Parts...
K7 GRAIN SILO INSTRUCTIONAL
Переглядів 4744 місяці тому
Welcome to HDAmodelworx, where we provide the best parts for your scale modeling needs! Today's video is a quick demonstration of how to install our K7 Space Station grain silo parts for the TOS Star Trek K7 Space Station from AMT as demonstrated by Jason from Jason's Model Shop. Thank you, Jason for the demonstration. We recommend Jason's work which you can follow on his social media here: lin...
Star Trek K7 Space Station Window Masks. Instructions Series for the AMT model kit.
Переглядів 3544 місяці тому
Welcome to HDAmodelworx, where we provide the best parts for your scale modeling needs! Today's video is a quick demonstration of our windows masks for the TOS Star Trek K7 Space Station from AMT as demonstrated by Jason from Jason's Model Shop. Thank you, Jason for the demonstration. We recommend Jason's work which you can follow on his social media here: linktr.ee/jasonsmodelshop These masks ...
5mm 4pin RGB Tri Color Common Anode Clear Lens LED
Переглядів 467Рік тому
5mm 4pin RGB Tri Color Common Anode Clear Lens LED available in a pack of ten with resistors for 9-12Vdc. This Led is perfect to be controlled with PWM to create virtually any color. There are many types of electronic control boards available to produce any combination of color output. An Arduino is just one method. Available now from HDAmodelworx.com at: hdamodelworx.com/5MM-4-pin-Common-Anode...
ICE BLUE 2 7mm x 1 meter CoB LED Strip
Переглядів 711Рік тому
In today's video I show you .... Welcome to HDA Modelworx, where I provide the best parts for your scale modeling needs! 2.7mm x 1 meter COB (chip on board) high LED/SMD density LED strip with 480 LEDs per strip. Perfect for lighting scale models with limited space and high density light output is needed. Provides less visible hotspots due to density of the leds which results in a smoother look...
YELLOW 2 7mm x 1 meter CoB
Переглядів 84Рік тому
In today's video I show you .... Welcome to HDA Modelworx, where I provide the best parts for your scale modeling needs! 2.7mm x 1 meter COB (chip on board) high LED/SMD density LED strip with 480 LEDs per strip. Perfect for lighting scale models with limited space and high density light output is needed. Provides less visible hotspots due to density of the leds which results in a smoother look...
RED 2 7mm x 1 meter CoB LED Strip
Переглядів 68Рік тому
In today's video I show you .... Welcome to HDA Modelworx, where I provide the best parts for your scale modeling needs! 2.7mm x 1 meter COB (chip on board) high LED/SMD density LED strip with 480 LEDs per strip. Perfect for lighting scale models with limited space and high density light output is needed. Provides less visible hotspots due to density of the leds which results in a smoother look...
GREEN 2 7mm x 1 meter CoB LED Strip
Переглядів 189Рік тому
In today's video I show you .... Welcome to HDA Modelworx, where I provide the best parts for your scale modeling needs! 2.7mm x 1 meter COB (chip on board) high LED/SMD density LED strip with 480 LEDs per strip. Perfect for lighting scale models with limited space and high density light output is needed. Provides less visible hotspots due to density of the leds which results in a smoother look...
BLUE 2 7mm x 1 meter CoB LED Strip
Переглядів 192Рік тому
In today's video I show you .... Welcome to HDA Modelworx, where I provide the best parts for your scale modeling needs! 2.7mm x 1 meter COB (chip on board) high LED/SMD density LED strip with 480 LEDs per strip. Perfect for lighting scale models with limited space and high density light output is needed. Provides less visible hotspots due to density of the leds which results in a smoother look...
WARM WHITE 2 7mm x 1 meter CoB LED Strip
Переглядів 105Рік тому
In today's video I show you .... Welcome to HDA Modelworx, where I provide the best parts for your scale modeling needs! 2.7mm x 1 meter COB (chip on board) high LED/SMD density LED strip with 480 LEDs per strip. Perfect for lighting scale models with limited space and high density light output is needed. Provides less visible hotspots due to density of the leds which results in a smoother look...
2.7 mm x 1 meter WHITE COB LED Strip
Переглядів 532Рік тому
Welcome to HDA Modelworx, where I provide the best parts for your scale modeling needs! 2.7mm x 1 meter COB (chip on board) high LED/SMD density LED strip with 480 LEDs per strip. Perfect for lighting scale models with limited space and high density light output is needed. Provides less visible hotspots due to density of the leds which results in a smoother looking lighting. Designed to operate...
0805 PULSATING WARM WHITE SMD
Переглядів 4832 роки тому
0805 PULSATING WARM WHITE PRE-WIRED SMD from HDAmodelworx. This SMD pulsates similar to our 3mm and 5mm pulsating LEDs and comes in packs of five pre-wired with resistors for 9-12vdc. Perfect for lighting models in tight locations or for small models where space overall is limited. These units also come in Warm White.
0805 PULSATING WHITE SMD
Переглядів 4982 роки тому
0805 PULSATING WHITE PRE-WIRED SMD from HDAmodelworx. This SMD pulsates similar to our 3mm and 5mm pulsating LEDs and comes in packs of five pre-wired with resistors for 9-12vdc. Perfect for lighting models in tight locations or for small models where space overall is limited. These units also come in Warm White.
Updated Runabout Decals with New RCS Thrusters and other details
Переглядів 3572 роки тому
Jason, from Jason's Model Shop, present an overview of the hull markings along with the new RCS thruster and other details. Jason also takes you through installing the RCS thruster decals in their locations on the model. These decals provide all the hull markings along with details that are missing from the kit included sheet. These replacement decals are for the AMT Runabout Rio Grande model k...
3mm WARM WHITE PULSE FADING LED TEN PACK
Переглядів 8095 років тому
3mm WARM WHITE PULSE FADING LED TEN PACK
Greenstrawberry Star Destroyer Lighting kit from HDAmodelworx
Переглядів 3,7 тис.6 років тому
Greenstrawberry Star Destroyer Lighting kit from HDAmodelworx
0805 Flicker Warm White Pre-wired SMDs
Переглядів 5636 років тому
0805 Flicker Warm White Pre-wired SMDs
0805 RGB Color Changer Fast to Slow
Переглядів 3,9 тис.7 років тому
0805 RGB Color Changer Fast to Slow
STAR WARS: Build Your Own 1:2 Scale R2-D2 From DeAgostini Issues 5-8 By HDAmodelworx
Переглядів 1,3 тис.7 років тому
STAR WARS: Build Your Own 1:2 Scale R2-D2 From DeAgostini Issues 5-8 By HDAmodelworx
Pretty cool!😊 How's business, Jerry?
11 years later and I'm about to build my own. What happened to your build?
Oh no, you offset the bridge. That's insane. That was just a production blooper. You can't actually think they would build a real ship that way. Yuk.
I used these leds for the photon torpedo effect in the Klingon kronos One starship! Front and back it looks great!!!
Hi. Are you still able to make custom decals? Thanks
I like the content. Thanks for sharing this with us, and looking forward to seeing more.
Nicely done sir. 🙂
Does he make window Masks for 1/537 scale starships?
Not sure how well this would work but... Instead of the tedious process of applying individual windows, you could remove the windows you *don't* want to apply from the mask. Then get yourself some "Cricut 2002363 Vinyl Transfer Tape." You slap that down over the mask. When you peel it up, the window masks will be stuck to the transfer tape. Then wrap the transfer tape around the K7 tower. When you peel the transfer tape away, the window masks should be stuck to the K7. The transfer tape works great for applying vinyl decals to car windows, laptops, etc., but I'm not sure how well this would work on the rounded surface. But that could be solved by doing it in sections.
Pretty nice demo!
A lot of patience involved here as well, Jerry.😉
Disculpa, puedo conectarlos a 5v usando alguna resistencia?
I bought the 1/350 kit from JT-GRAPHICS in March, and he has ghosted me. Too bad looks like a beautiful kit. Can't believe this is what has become of JT-GRAPHICS
Did you ever finish this? I can't seem to find a final video.
Thank Jerry!😊 The possibilities are endless. ua-cam.com/video/V3i_2svZTQs/v-deo.html
I've used these in a few of my Enterprise builds so far so good i like these better than the typical LED strips 👍🏾
Great product! Can these be cut into shorter lengths and re-soldered? If so what is the shortest cut length?
Are they Cuttable ?
9 years later... I think you forgot the "reveal" video.
4:02 looks amazing! I love how you used fiber optics vs leds. 👍
Did you ever finish the model? I can't find a final reveal video. Nice work btw
the motor sound ruins the effect
A little late but thank you Jerry for providing these lights. Did you finish your Enterprise?🙂
What is the putty called to fill the cracks? I have this kit and would love to do this build, but I need to learn about lighting. Right now, I know very little...lol. I'm enjoying this series.
The Bussards sounded like cake mixers. Is that really how loud (and horribly annoying) they are? Please tell me it’s just a sensitive mic.
This is a really fun kit! I enjoyed the first build I did and I'm planning to build another one later this year. I know that these smaller kits can be frustrating to paint on all of the details, but I am tempted to build Red 1 - 6 of these X-wings, I just think it would look really cool.
Ever think of putting the rooms behind the windows?
Fantastic. If you make these commission, feel free to float me a price. Especially if you do the hangar bay as well. Definitely interested.
Very useful and well done video.
These lights are Fantastic!!!😀💯
I looked at this some years ago and stalled my build because those damned motors are so noisy! No, I don't want any moving parts. But I want nacelle ends that look convincing, so I started looking around for replacement ideas. One idea, and the leading contender, is to mount a projector in each nacelle. The projector would show a constant, looping animation of the lights and fan blades back-lighting the nacelle domes. This has the advantage of letting me experiment with other lighting effects like swirling plasma or pinpoint flashes. It has the disadvantage of being very expensive, and so far projector technology stopped shrinking a few years ago just before reaching the size I'd need. The optics are a little too big for the nacelles. But this is the most versatile solution. Next, I was thinking of making custom LCD strips lining the inside of a frosted dome. I'd need at least sixteen of these things to pull off believable motion, and I couldn't sequence them slowly or the effect breaks down ... unless I have a *lot* of blades. I've only recently seen instructions for home made LCD parts, and it's a multistep process. Finally, packing the dome with fiber optics and carefully aligning the fibers with lights further back in the nacelles so the effect of lighting with animated components could be believably simulated. This is the second-most versatile approach, but my god, keeping track of all those fibers!
I should get ahold of a copy of this. About to buy the 350 scale ship
Could that motor be a little louder? I said COULD IT BE LOUDER! The dog will hide under the bed and the neighbors will probably call the cops.
Hey Jerry! Good to see you posting again. What are your thoughts on Micro Set? Is it necessary? Thanks, -Jim
Jerry+ are you working on decals for the uss Grissom for Aztecing wall paper dicals
Downside to this kit is the lack of the green clear pieces when the original 1966 kit was made to be lighted.
Well that "Alternate" display method has been around since the first release of this kit in 1966 Can't really beat that method though.
Wouldn't it be less fuss just to mask and pin stripe with paint?
Hi Jerry! Did you finish this build? Great work on this!
Absolutely wonderful work, I just ordered this model myself and look forward to building it.
I have this guide. It is extremely helpful. The polar lights model doesn’t tell you exactly what colors to use and with how many different versions of paint that the studio model have this guide is a must have.
Thanks for this video! I just picked up this kit on Ebay! I am planning on ordering new decals and the Green Strawberry engine kit. The Original decals are not yellowed out, but he age is a concern.
When will you start the build. I've been looking. Gonna do one myself.
I still want one
Why no mon calamari yet
I come here for the kitty so cute!! Any ways good modeling!
I know nothing more about the guide than before I clicked play.
I just got my light kit and I think something may be wrong. I wanted to test the Bussard lights but they’re lifeless. The motors work fine. One of the light PCBs somethings flashed on for the length of a camera flash but that’s all. The other one I believe has two solder joins bridged so I’m guessing that’s causing a dead short on one of them.
Anyone offer a kit of the Grissom anymore?